3D Printers, Filament and Parts
PETG (Polyethylene terephthalate glycol modified) Filament Flexible yet crazy strong Does not disolve in acetone Biodegradeable ROHS Certified - (ROHS = Restriction of Hazardous Substances) Low Tolerance: ± 0.03 mm for Better Results On Detailed Prints Print Temp: 200°-240°C : Bed/Platform Temperature: 75°-85°C Spool Diameter: 8" : Spool Width: 2.5"
PLA (Polylactic Acid) Filament - Not petroleum based. Even better for the environment! Minimal to NO odors! - ROHS Certified - (ROHS = Restriction of Hazardous Substances) Low Tolerance: ± 0.03 mm for Better Results On Detailed Prints Print Temp: 190°-230°C : Bed/Platform Temperature: 60°-80°C Spool Diameter: 8" : Spool Width: 2.5"
Product features MK2B: 214mm x 214 mm (8.4 in x 8.4 in) 12V or 24V Heated Bed for MakerBot RepRap UP Mendel I3 Printer Thermistor included: 100K ohm NTC 3950, soldered and installed Soldered power leads Red soldermask and white silkscreen on both sides
Parts Kit Includes: Ceramic Cartridge Heater Element: 12V 40w, 6mm diameter, 20mm length Thermistor: 100KΩ Extruder Tube: 30mm M6, Teflon coated inner 2mm diameter Brass Nozzle: 1.75mm Input with 0.4mm output Heater Block: 20mm x 20mm x 10mm Heat Resistant Tape: High Temperature Polyimide Tape 8” x 3/8”