Racing Solutions

Find parts and solutions that are specifically for building a high performance racing quadcopter.

Racing Solutions There are 20 products.

per page
Showing 1 - 12 of 20 items
  • Quick view
    $48.95 In Stock

    4 ESCs on 1 board Input: 2-6S Battery Supply BEC: No Firmware Modes: Dshot600 (Default), PWM, Oneshot, Multishot, DSHOT Programming: Single Wire MCU: EFM8BB21 48Mhz Con Current: 35A Peak Current(10s) 40A Size: 36mm x 36mm Mounting Size: 30.5mm x 30.5mm

    $48.95
    In Stock
  • Quick view
    $9.95 In Stock

    Specifications: Center frequency: 5.8 GHz                        Bandwidth: 500 MHz (5.55 – 6.05 GHz)    Matching: S11 < -20 dB, VSWR < 1.22 (at center frequency) Axial ratio: < 1.3                                          Radiation efficiency: 95% Connector: RP-SMA (without pin)Package Contains: 1 x Pagoda 2 RP-SMA Antenna

    $9.95
    In Stock
  • Quick view
    $49.95 In Stock

    Specification: MCU: STM32F745VET6 Firmware: Betaflight_3.2.0_OMNIBUSF7 Input voltage: 2-4S BEC: 5V/1.2A Sensor: MPU6000+ ICM-20608, Barometer: BMP280 OSD: AT7456E Reciever Suport: SBUS,IBUS,DSMX,SUMD Port: LED_Strip port/Buzzer port/Current sensor port/Voltage sensor port Size: 36x36mm Mounting hole: 30.5x30.5mm Weight: 7.2g

    $49.95
    In Stock
  • Specifications: MCU: STM32F405 Size: 36mmx36mm boards with 30.5mm mounting holes Height: 14mm Weight: 25g Sensors: Use MPU6000 over SPI Bus Blackbox: Micro USB OSD: Integrated VTX: 48ch integrated with audio, remote configuration Input Voltage: 2-5S ESC Max Current: 4x35A, Max Instant: 4x50A (15seconds) ESC Signaling: Onshot125/42, Dshot150/300/600

    $95.49
    In Stock
  • Quick view
    $18.00 In Stock

    Description: KV:2550KV Configuration:12N14P   - 12 Teeth/Lobs and 14 Magnets No.of Cells(Lipo):3-5S Rotor:N52H arc magnets   Wire AWG:20AWG   Shaft:Titanium Alloy shaft Stator:0.2mm Kawasaki silicon steel   Bearings:Japanese NSK 8x3x4mm   Base casing:Al 7075 Bell cap:Al 7075  Prop Adapter Shaft Thread:M5   Bolt Pattern:M3 (16X16mm) Weight:26g with 16cm SR...

    $18.00
    In Stock
  • Quick view
    $50.00 In Stock

    Package Includes 1x  2mm Top   Plate 1x  3mm Bottom Plate 4x 4mm Arms  4x 8mm bolts 12 x 12mm bolts 1x Camera mount  TPU  4x M3 Nylock   nuts 6x 20mm Standoffs    Motor Mounting Holes In Arms Are 16X16 Frame dimensions 213mm x 162.5mm 

    $50.00
    In Stock
  • Quick view
    $50.00 In Stock

    Package Includes: 1x Bottom Plate 3mm 1x Top Plate 1.5mm 6x 4mm Arms 2 extra Arms 1x  Camera mount   1x  VTX Mount All Hardware for Putting Frame together Weight: 63g

    $50.00
    In Stock
  • Quick view
    $45.00 In Stock

    Package Includes: 1x 1.5mm carbon fiber top plate 1x 3mm carbon fiber bottom plate 4x 3.5mm carbon fiber arms 4x 8mm bolts 8x 10mm bolts 1x Camera mount set TPU 4x M3 Nylock nuts 4x 20mm standoffs  

    $45.00
    In Stock
  • Quick view
    $8.49 In Stock

    Description: 4 Full Sets - Total of 16 propellers Model: 5051 Length: 5" Pitch: 5.1 Number of Blades: 3 Blades Material: ABS plastic Four Colors Include: Translucent Green, Translucent Red, Translucent Yellow, Translucent Pink Shaft: 5MM Weight: 2.3g / pcs   Package Includes: 8 x CCW Propellers, 8 x CW Propellers

    $8.49
    In Stock
  • Quick view
    $8.49 In Stock

    Description: Model: 5048 Length: 5" Pitch: 4.8 Number of Blades: 3 Blades Material: ABS plastic Color Options: Translucent Green, Translucent Blue, Black Shaft: 5MM Weight: 2.3g / pcs   Package Includes: 4 x CCW Propellers, 4 x CW Propellers (8 total)

    $8.49
    In Stock
  • Quick view
    $18.98 In Stock

    Description:    Dimension:21.5x12x3.5mm(LxWxH)    Weight: 1.6g    Channels: 16CH from SBUS(CH1~CH15 for PWM, CH16 RSSI for FC)    Input Voltage Range:3.7~10V    Current:30mA@5V    Range:FULL range    With RSSI output on board:Analog 0~3.3V    Firmware Upgradeable    Compatibility:FrSky D16 mode

    $18.98
    In Stock
  • Quick view
    $29.95 In Stock

    Description: Size: 31mm x17mm x 4mm Weight: about 12g without wires Input voltage: 2-6S LiPo BEC output: No Continuous current: 70 Amps Burst current (15s): 80 Amps Firmware: BLHeli_S Main IC: SILABS EFM8BB21 Protocols: Damped mode, PWM, Oneshot125/42, Dshot 150/300/600 PCB with 6-layers 4OZ (power layer) thickened copper

    $29.95
    In Stock
Showing 1 - 12 of 20 items