BETAFPV 1s Lipo LiHV Charger Board for Tiny Whoop Battery

New

  • Charge 1S Lipo batteries (4.2V) and HV Lipo batteries (4.35V) .
  • XT60 Input (3s or 4s) for field charging.
  • Turns itself off when supply battery reaches safe low-voltage
  • 2 channels BEC for supply current. 400mAh current per charge port
  • LED lights indicate when each battery is done charging

More details

$18.99

More info

BETAFPV 1s Lipo LiHV Charger Board - Charge up to 6 Lipo or HV Lipo batteries at once! Designed for Inductrix, Tiny whoop, Blade Nano QX FPV etc

Just take any 3s or 4s lipo with an XT60 connector and plug it in to this charger and charge dozens of 1s packs. You could also use a wall adapter as supply power so you can continuously charge at home. Once supplied with a 3s or 4s battery, just plug your 1s batteries into the charger to start charging. When you connect a discharged 1s battery to the charger the corresponding ports LED light will turn red until the battery is fully charged. Once charged, the LED will turn green and you can remove your 1s battery and fly!


Specification:

  • Weight: 36g
  • ​Dimensions: 75x42x17mm
  • ​Input: 3s - 4s Selectable
  • Cutoff Voltage: 10.8v (3s), 14.4v (4s)
  • Output: Fixed at approx 400 milliamps
  • 4.20v cell charging cutoff for Lipo battery (+- 0.5% margin of error)
  • 4.35v cell charging cutoff for HV Lipo battery (+- 0.5% margin of error)




Package:
1 * BetaPower 1s Lipo LiHV Charger Board by BETAFPV

Reviews

No customer reviews for the moment.

Write a review

BETAFPV 1s Lipo LiHV Charger Board for Tiny Whoop Battery

BETAFPV 1s Lipo LiHV Charger Board for Tiny Whoop Battery

  • Charge 1S Lipo batteries (4.2V) and HV Lipo batteries (4.35V) .
  • XT60 Input (3s or 4s) for field charging.
  • Turns itself off when supply battery reaches safe low-voltage
  • 2 channels BEC for supply current. 400mAh current per charge port
  • LED lights indicate when each battery is done charging

Accessories

10 other products in the same category: